Accessories

Electric Bathing Trolley Designed for Daily Nursing Home Operations

In nursing homes and long-term care facilities, assisted bathing is a recurring part of resident care. The same bathing equipment may serve different residents throughout its operating life, including individuals who cannot stand safely, maintain a stable seated position or complete personal hygiene procedures without substantial caregiver assistance.

This electric nursing home bathing trolley is designed around that institutional workflow. It combines a full-length waterproof patient platform with electric height adjustment, powered tilting, extended folding side rails and a mobile powder-coated carbon steel chassis.

Rather than functioning simply as a transport trolley, the equipment provides a dedicated working platform for resident transfer, assisted bathing, personal hygiene and repeated institutional care.

Built for Repeated Assisted Bathing in Long-Term Care

One Bathing Platform for Residents with Different Care Needs

Residents within the same nursing facility can have very different mobility levels. Some may require only limited assistance, while others may be unable to stand or remain safely seated throughout a complete bathing procedure.

The trolley provides an internal patient support area of approximately 1950 × 630 mm, allowing highly dependent residents to remain supported in a lying position during washing and hygiene care.

For facilities caring for multiple residents, this creates a dedicated bathing solution for users whose mobility limitations make conventional shower chairs unsuitable.

Electric Height Adjustment Supports Different Caregivers and Residents

Approximately 430–660 mm Adjustable Working Height

The patient platform can be electrically raised and lowered through an approximate range of 430–660 mm, excluding the side rails.

In an institutional environment, the same equipment may be operated by different caregivers during different shifts. Adjustable working height allows the trolley to be repositioned according to the caregiver, resident and procedure instead of forcing every user to work around one fixed platform height.

Useful throughout the Complete Bathing Routine

Transfer preparation, washing, skin care, drying and dressing can require different levels of access to the resident. Powered height adjustment allows the working position to change as the care procedure progresses.

Independent Electric Tilting Adds Positioning Flexibility

A separate electric actuator controls the tilting movement of the patient platform. Together with the lifting actuator, the trolley provides two independently powered adjustment functions.

This configuration gives caregivers additional positioning flexibility during assisted bathing while reducing dependence on manual mechanical adjustment of a loaded patient platform.

Powder-Coated Carbon Steel Construction for Practical Institutional Procurement

High-Strength Steel Frame with Protective Surface Treatment

The main supporting frame is manufactured from high-strength carbon steel. A protective powder coating is applied to the surface to help improve resistance to moisture, corrosion and everyday wear.

This material configuration provides nursing homes and long-term care buyers with an alternative to stainless steel construction while retaining the principal electric adjustment and assisted bathing functions of the trolley.

A Practical Option When Balancing Equipment Function and Procurement Budget

Long-term care facilities often need to evaluate equipment across multiple factors, including required functions, quantity, operating environment and purchasing budget.

Where a powder-coated carbon steel frame is suitable for the intended application, this configuration allows buyers to retain electric lifting, powered tilting, waterproof patient support, folding side protection and mobile operation without automatically specifying a stainless steel chassis.

Waterproof Padded Surface for Repeated Resident Care

High-Toughness Waterproof Material with EVA Padding

The resident support surface uses a high-toughness waterproof outer material with high-density EVA padding inside. The waterproof layer is designed for direct exposure to water during bathing, while the internal padding provides a softer patient contact surface.

This is especially important for residents who may remain in a lying position throughout the complete bathing procedure.

Removable Surface Supports the Cleaning Workflow

When bathing equipment is used for different residents, post-use cleaning becomes part of the daily operating routine. The patient support surface can be removed for cleaning and disinfection after use.

This allows the resident-contact component to be handled separately during routine equipment cleaning and helps prepare the trolley for subsequent care procedures.

Folding Side Protection Designed around Caregiver Access

Extended Side Rails for Mobility-Limited Residents

Extended protective side rails are positioned along both sides of the bathing platform. When raised, they provide lateral protection for residents who may be unable to maintain a stable body position independently.

The rail structure is designed to withstand vertical pulling or pushing loads of up to 100 kg, providing a robust configuration for repeated professional care.

Up to 180° Rotation after Lowering

During resident transfer, washing, drying or repositioning, caregivers may require closer access from the side of the trolley. The rails can be lowered and rotated through up to 180 degrees to create a more open working area.

After the procedure has been completed, the rails can be returned to their protective position.

Reinforced Double-V Structure for Repeated Adjustment Cycles

Load Distribution beneath the Patient Platform

The lifting system incorporates a reinforced double-V supporting mechanism. The structure is designed to distribute mechanical loads through the moving assembly during electric raising and lowering.

For nursing homes where equipment may be adjusted repeatedly during its service life, the supporting structure is an important consideration in addition to motor quantity and adjustment range.

240 kg Rated Load Capacity

The trolley provides a rated load capacity of up to 240 kg, enabling facilities to accommodate a broad range of adult residents requiring assisted bathing.

For institutional procurement, the load rating should be considered together with the patient platform dimensions, frame construction, side protection and powered adjustment system.

Mobile Design Fits the Nursing Home Bathing Workflow

Four 5-Inch Swivel Casters

Four 5-inch swivel casters allow caregivers to move the trolley according to the facility layout and bathing routine. This can include repositioning between resident care areas and designated bathing spaces.

The mobile configuration is particularly useful for highly dependent residents because the bathing platform can become part of the overall care workflow instead of relying exclusively on permanently installed bathroom equipment.

Individual Brakes Secure the Trolley during Care

Each caster incorporates an individual brake. Once the trolley has reached the required position, caregivers can secure the casters before beginning bathing or hygiene procedures.

The model uses individual caster brakes rather than a central locking brake system.

What Matters When a Shower Trolley Is Used for Multiple Residents?

Cleaning between Uses Must Be Considered from the Beginning

For institutional care, purchasing decisions should consider what happens after each bathing procedure. Equipment that serves multiple residents needs a practical cleaning workflow as well as appropriate patient support.

The removable waterproof surface allows the primary resident-contact component to be cleaned and disinfected as part of the facility's routine hygiene procedures.

Different Residents Require Different Working Positions

A fixed-height trolley provides the same working position regardless of resident size, caregiver height or care procedure. Electric adjustment allows the platform to be repositioned according to different operational requirements.

Caregiver Access Should Not Be Blocked by Patient Protection

Side protection is important for highly dependent residents, but permanently fixed barriers can make bathing and transfer more difficult. The folding and rotating side rail system allows the trolley to alternate between protective and open-access configurations.

Look Beyond Initial Price When Comparing Nursing Home Bathing Equipment

For a nursing home purchasing equipment for repeated use, the lowest initial purchase price does not necessarily provide the most suitable solution. Buyers should consider how the equipment fits into daily bathing routines, how easily caregivers can adjust and access the resident, how the patient-contact surface is cleaned and whether the structural configuration matches the intended operating environment.

The powder-coated carbon steel version provides another procurement option for facilities that need the complete electric bathing functions but do not require a stainless steel frame for every application.

Suitable for Facility Expansion and Equipment Standardization

For nursing home groups, long-term care projects and medical equipment distributors, using a consistent bathing trolley configuration can also simplify equipment planning across multiple rooms, wards or facilities.

Available material configurations allow buyers to select equipment according to project requirements while maintaining similar core bathing and positioning functions.

Key Technical Specifications

Product Type: Electric Nursing Home Bathing Trolley / Electric Shower Trolley.

Overall Dimensions: 2150 × 870 × 680–900 mm, including side rails.

Internal Patient Area: 1950 × 630 × 430–660 mm, excluding side rails.

Electric Height Range: Approximately 430–660 mm, excluding side rails.

Electric Functions: Powered overall lifting and powered tilting.

Actuator Configuration: Two independent electric actuators controlling lifting and tilting.

Main Frame Material: High-strength carbon steel.

Surface Treatment: Protective powder coating.

Support Structure: Reinforced double-V lifting mechanism.

Patient Surface: High-toughness waterproof material with high-density EVA padding.

Cleaning Design: Removable bathing surface for routine cleaning and disinfection.

Side Rails: Extended folding protective side rails.

Side Rail Rotation: Up to 180° after lowering.

Side Rail Load Resistance: Up to 100 kg vertical pulling or pushing load.

Casters: Four 5-inch swivel casters.

Brake System: Individual caster brakes.

Rated Load Capacity: 240 kg.

For Nursing Home Projects and Long-Term Care Procurement

This electric bathing trolley is designed for nursing homes, long-term care facilities, rehabilitation institutions and other professional care environments where residents require substantial assistance with personal hygiene.

For facility operators, the combination of electric positioning, removable waterproof patient support, folding side access and mobile operation provides a practical solution for repeated assisted bathing routines.

For medical equipment distributors and long-term care project suppliers, the powder-coated carbon steel configuration provides an additional option when balancing required functions, purchasing quantities and project budgets.

Explore our Nursing Bed range for long-term resident care solutions and our Nursing Home Accessories for complementary care equipment.

For technical specifications, available configurations, OEM/ODM requirements or bulk purchasing, contact us with your required quantity and project requirements.